CNC Live v2.3

- Cannot run downloaded setup file.

- Windows® cannot recognize the type of downloaded setup file.

No extension for the downloaded setup file.

Rename downloaded setup file to "cnclive.exe" 

- Installer cannot detect MCR® or MATLAB®.

- Installer request to download MCR® components continuously.

Try to register dll file manually by applying the following steps:
1. On the Taskbar, select Start > Run.
2. In the Open field, type
regsvr32 "\cnclive_1_0.dll"
For example:
regsvr32 "C:\Program Files\CNC Live 2.2.0 BETA\cnclive_1_0.dll"
3. Press Enter.
4. A message will appear on the screen to tell you if the registration process has done correctly or not.

Cannot drag bmp of dxf file.

- Checks file extension; all letters should be lower case.

- Drag should be within previous drawing \ table dimensions.  

Some entities are missed when tool diameter is "3" units or more and the drawing contain discrete lines and dots.

Change tool diameter to "1" unit, this will not affect the execution since the drawing entities are discrete

On start up, drive(s) start moving for one second. 

This is a normal behavior for this kind of controller; interfacing card should be designed to avoid it.

Cannot pause the movement when hitting "Abort" button.

Operator should be aware about this behavior.
 

Machine does not respond immediately when hitting "Pause" while execution.

Operator should be aware about this behavior. It will pause after finishing under execution entity or when the first 254 steps in single axis completed.

When hitting one of the Jog buttons while tool location is out of current drawing / table dimension; tool will go to nearest boundary.

If this behavior is not acceptable, hit "Set home as (0,0)" button instead and then hit "Go home now"

 When pressing key to turn Z on & off 5 times; Windows® StickyKeys dialog box appear while the machine still running.

Disable this option from Windows® accessibility option.